Step-by-step Guide to Installing a New Shower Unit

Get Started

What are your thoughts regarding How to Install a Shower Enclosure ?

A successful shower setup requires cautious preparation as well as a great deal of job. In many cases, you will certainly need to do 3 types of jobs: mounting walls, setting up the plumbing, as well as ending up walls.

Prep work

To start with, you should select the type of shower that you want to mount. It is very important to ascertain whether the selected shower can dealing with specific systems and also can regulate a safe level of water through the boiler. The majority of shower units nowadays are developed to be versatile to different water pressures (such as stored hot water as well as cool mains).
It is also essential to take into consideration the water pressure and the preparation of the piping and also water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be linked to the bathroom faucet based on your requirement, and the water temperature can be changed by means of the faucets. Push-on mixers are cheap and also very straightforward to install. Nevertheless, although the hose pipe connection is easy, it is quickly removed. Furthermore, it is bothersome to adjust the temperature level.

Bath/Shower Mixer: The hose and spray of this sort of shower are combined with a bath mixer faucet, and also the temperature can be adjusted through the bath faucets. It is a really economical alternative and also no added plumbing is entailed. Nonetheless, the bath/shower mixers additionally experience troublesome temperature control choices.

Manual Mixer: The hose and also spray of a manual mixer shower device belong of the wall surface system and the cold and hot water materials are linked to a single valve The temperature level and also pressure of the water are controlled through either one or a selection of knobs (in more pricey showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for extra plumbing of hot and cold water pipes.

Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall unit and also the hot and cold water supplies are attached to a single shutoff right here also. It is total with a built-in stabiliser to self-adjust the water temperature as well as to prevent it from coming to be too warm. One of the largest advantages of a thermostatic mixer shower kind consists of practical temperature level control. Nevertheless, it is one of the most expensive of the various mixer options.

Power Shower: A power shower is a solitary device consisting of a powerful electrical pump that can changing both the water stress and temperature. This sort of shower can be fitted if there is supply of water from a cold water tank and also a hot water cylinder. A power shower makes the adjustment of both stress and also temperature easy. On the other hand, it disagrees for water heated up straight by the shower or where the water is supplied by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it heats up the water electrically. It is necessary to note that for this shower kind to be installed, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and pressure to be readjusted by means of a handle. Models with temperature stabilisers are better as they stay untouched by various other faucets elsewhere in use within the home. A major disadvantage of electrical showers is that the control handle only allows for the option of high temperatures at much less stress, or lower temperature levels at a greater pressure. This is problematic in the winter season when the spray is frequently weak and the keys water is cooler. However, this problem is dealt with in some versions which are readily available with a winter/summer setup.

Approach

Relying on the kind of shower you desire to install, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it has to have a check valve.
Before starting, it is a good idea to mark the placements of the shower head and control, and to plan the pipe-work involved. Furthermore, the drainage system to remove the drainage will certainly require to be prepared. Both settings of the cable television path and the shower switch will likewise need to be taken into consideration if an immediate or electrical shower system is being installed.
Use the instruction guide supplied with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to cut off the water supply. In order to protect the pipelines, they need to be given a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can after that be hidden right into the wall and plastered over to neaten the overall look.
Fit the base tray, shower head, and fittings.
Attach the primary shower control to the pipes that will be supplying the water (This might need a women screw string adapter).
Reconnect the supply of water as well as test the pipelines for any leakages, as some may need firm.
If you are mounting an electrical shower, keep in mind to turn off the electrical energy supply before making any type of electrical connections. When these links have actually been made (there need to be guidance within the user's manual), the power supply can be switched back on.

Changing Water Pressure to Match Your Shower

The cold water storage tank can be lifted to a better height (in some cases as low as 150mm (6inches)) by installation a solid wooden assistance below it - potentially composed of struts and also blockboards. If you choose this choice, the major as well as circulation pipes will certainly also need to be elevated to fulfill the new elevation of the reservoir.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be linked right into the power supply in order to operate.

Piping and Drainage

It is best to use 15mm size supply pipelines, as well as make the go to the shower as brief as well as straight as possible so regarding keep maximum stress as well as reduce heat loss. Additionally, by minimising the use of joints for pipe edges, you can reduce the resistance in the flow of the water system. You can achieve this by flexing the pipelines instead.

Many Common Errors

Going against or neglecting local code constraints.

Utilizing pipes that are also tiny.

Affixing copper to galvanized without using a brass or dielectric suitable in between both.

Not using tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not installing an air space filling up for components.

Reducing supply stub outs as well short to mount the shutoff valves onto after the ended up wall surface is in area.

Not properly straightening tubes right into fittings or quit valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.).

When turning the water back on in your home, always run the outside hose pipe shutoff or flush your bathrooms to bleed dust as well as air from the lines. This particles can trigger troubles in your sink taps and other plumbing trim.

The best type of shower enclosure

South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.

When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.

Are you confused?

You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.

If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.

Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.

As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.

Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.

South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

https://southindiaagencies.com/blog/best-type-of-shower-enclosure/

I hope you enjoyed our section about How to Install a Direct-to-Stud Shower Enclosure. Thanks a ton for taking the time to read our article. In case you enjoyed our page kindly don't forget to share it. I treasure reading our article about How to Install a Shower Enclosure .

Call Today